Basic Electrical Wiring Techniques You Need to Know for your New Home

Knowing how electrical systems work is important especially if you have just moved to a new home. The basics will help you understand how you can fix minor electrical issues without calling an expert to assist you.

With this article, we are going to discuss some of the best tips on how you can fix small electrical issues without calling an electrical services perth team.


Master the Basic Skills on Electrical Systems

Mastering the basic skills on electrical systems are essential in electrical wiring. It is crucial that you know how to splice, strip, and join the wires together.

  • Splicing

When you splice the wire, make sure that you hold the end of the stripped wire with a pair of Lineman’s pliers. Then, you twist it in a clockwise motion until you feel the resistance on the wire’s end. Do not turn the wire so hard. After that, cut the tails of the wire’s tip.

  • Stripping

In stripping the wire, make sure that you use a pair of Lineman’s pliers to remove the rubber insulation of the wire. Make sure that you don’t make dents on its body.

  • Joining

Lastly, when you join the wires to a terminal, you should grab the bare wire above the its insulation. Make sure to use a long-nose plier to twist the bare wires. Then, bend the right wire and make a half circle. Lastly, get a screwdriver and loosen the screw of the desired terminal.  Attach the bare wires and screw down the wires tightly into the terminal.

Tools and their Importance

Tools play an important role in a simple electrical project. The tools keep you safe from directly holding hazardous cables when you are fixing faulty wirings. Most people usually neglect using the appropriate tools because they think that they have the same function as the other common house equipment. Hence, make sure that you are using the correct ones.

Turn off the Electrical Power when you are Working

When working on electrical problems, make sure to wear well-insulated clothes and rubber sole shoes while turning off the power supply. You also need to remove jewelry and avoid touching the wires and outlets with wet hands. This procedure is important to avoid electrocution and other accidents to happen while you are working.

Pack the Wires into Electrical Boxes

Electrical wirings should be enclosed inside an electrical box. The electrical box protects the wires from being damaged. It also keeps people from accidentally touching the live wires. Electrical cables are semiconductors, and they can electrocute people when left unattended.

Test the Electrical Cable before Touching them

Whether you’re a beginner or not, never be complacent when touching wires even if the power supply is off. Before making contact, make sure to use a voltage detector. The voltage detector can indicate if the wires are live or not. When choosing the voltage detector, make sure to use the non-contact one.

Final Thoughts

These are just some of the techniques that you need to know before working on small wiring projects at home. Make sure that you know the basics and safety procedures before working on one. Safety is first when working on this simple yet possibly dangerous task.






Leave a Reply